Products

Traffic Safety
Traffic Safety steve@eye-dcreative.co.uk March 15, 2022
  • Base Square-shaped base with rectangle cut-out for key block to fit & lock system.
  • BHR-1 Hose ramp with angled sides. Center cavity designed for 2″ PVC pipe.
  • CG-HD Heavy-duty corner guards with reflective chevrons to increase visibility.
  • CG-MD Medium-duty corner guard with reflective chevrons to increase visibility.
  • Corner Piece Corner piece with rectangle cut-outs for key blocks to fit in & lock system.
  • CP-HD-2 Two channel heavy-duty cable protector with attached lid. Supports weights up to 12 tons.
  • CP-HD-3 Three channel heavy-duty cable protector with attached lid. Supports weights up to 40 tons.
  • CP-HD-5 Five channel heavy-duty cable protector with attached lid. Supports weights up to 40 tons.
  • CP-SD-2 Two channel standard duty cable protector with attached lid. Supports weights up to 5 tons.
  • CP-SD-3 Three channel standard duty cable protector with attached lid. Supports weights up to 12 tons.
  • CP-SD-5 Five channel standard duty cable protector with attached lid. Supports weights up to 9 tons.
  • CPC-SD-2L Corner cable protector with attached lid for left turns. Supports weights up to 5 tons.
  • CPC-SD-2R Corner cable protector with attached lid for right turns. Supports weights up to 5 tons.
  • CPC-SD-3L Three channel corner cable protector for left turns. Supports weights up to 12 tons.
  • CPC-SD-3R Three channel corner cable protector for right turns. Supports weights up to 12 tons.
  • CPC-SD-5L Five channel corner cable protector for left turns. Supports weights up to 9 tons.
  • CPC-SD-5R Five channel corner cable protector for right turns. Supports weights up to 9 tons.
  • CS-7 Cone Stabilizer.
  • DB-27 Molded rubber base with four holes for mounting.
  • DD-44 Rubber base with yellow safety striping and two orange plastic posts.
  • DH-CP-3 Drop over cable protector with 1.5″x0.5″ channel. Perfect for offices or homes.
  • DH-CP-4 Drop over cable protector with 4″x1.25″ channel. Perfect for offices, fairs or festivals. Drop over cable protector with 1.5″x0.5″ channel. Perfect for offices or homes.
  • DS-22 Drivewayspikes™ DrivewaySpikes are designed to stop unwanted vehicle traffic for residential, commercial and government use.
  • DS-47 Drivewayspikes™ DrivewaySpikes are designed to stop unwanted vehicle traffic for residential, commercial and government use.
  • DS-RS-Y Set of 5x 4″ replacement spikes.
  • DSSB-36 Splashblock with edge on three sides, one open edge.
  • Dual Side – Decorative Stepping-Stone Click link for purchase information
  • Extension Blocks Extension block will fit into base to increase height of containment system.
  • FP-80 Orange flexible post with three reflective silver stripes.
  • Friendly Flagger The Friendly Flagger from TCT is a conceptual design featuring TCT’s unique sign bases. The Friendly Flagger is designed for construction workers to use on-site to control the flow of traffic. With the Friendly Flagger, worker’s comfort is top priority. The design accommodates most 18” and 24” signs. The PVC staff has predrilled holes and cut-out for easy sign assembly. The staff is then simply dropped inside a PVC sheath, from which it swivels.
  • FS-1 Lag and shield fastener system for attaching products to concrete.
  • FS-2 Rebar spike for attaching products onto asphalt, gravel or dirt surfaces.
  • FS-3 Galvanized spike and washer for use on asphalt, gravel or dirt surfaces.
  • Grill mats Protect your deck with UV resistant, non-crack, non-deteriorating grill mat.
  • GS-20 Parking stop with smooth finish and reflective stripe.
  • HD-60 New heavy duty 60 lb. recycled rubber sign base with 5” rubber wheels.
  • Key Block Rectangle-shaped block, fits into base to lock containment system together.
  • Lane Separator High UV, modular, visible and can be used without being fixed down.
  • LS-25 Pedestrian crossing sign attached to flexible post on a durable rubber base.
  • LS-E End section for lane separators, sold in sets of one male and one female piece. Supplied in yellow or black.
  • LS-E-Y End section for lane separators, sold in sets of one male and one female piece.
  • LS-M-RP Middle section, multiple can be connected to run custom lengths. Features reflective striping.
  • LS-RP Flexible orange post with reflective striping, for use with LS-M.
  • LY-25 Pedestrian crossing sign attached to flexible post on a durable rubber base.
  • MWC-14 Military aircraft wheel chock (14″) with 3/8″ rope and lanyard system.
  • MWC-20 Military aircraft wheel chock (20″) with 3/8″ rope and lanyard system.
  • PSB-118 Speed bump with eight folding sections, alternating black and yellow.
  • QFSS-30 Quick Fence Safety System with 30-lb. sign bases.
  • Ramp System Consists of base and ramp section for machinery to easily enter and exit.
  • SB-20 Square sign base with molded center hole with PVC cap insert.
  • SB-30 Octagonal sign base with 1 ½” molded center hole.
  • SB-30W Octagonal base with molded 1 ½” hole, two wheels attached on one side.
  • SB-60 Octagonal sign base with 1 7/8” molded center hole.
  • SB-60W Octogonal base with 1 7/8″ molded center hole, two wheels attached on side.
  • SB-90 Octagonal base with circular footprint extender base bolted on using hex-head lag screws.
  • SBW Replacement wheels for SB-30W and SB-60W.
  • SMB-112 Sign mounting brackets designed for use with 1 ½” PVC post.
  • SMB-2 Sign mounting brackets designed for use with 2″ PVC pipe.
  • Speed Bump Sign 6-foot speed bump with flexible post & custom sign.
  • SS-25 Pedestrian crossing sign attached to flexible post on a durable rubber base.
  • SWC-7 7″ smooth wheel chock ideal for recreational vehicles or yard equipment.
  • SWC-7Y 7″ smooth wheel chock ideal for recreational vehicles or yard equipment.
  • SY-25 Pedestrian crossing sign attached to flexible post on a durable rubber base.
  • T-44 T-top replacement post for use in double delineator system.
  • TCT-CheckerMAT Raised diamond checks on one side of the mat. Extremely durable and flexible.
  • TCT-HDMat 8-10mm high-density, smooth, flat, quality recycled rubber mat.
  • TCT-LDMat 6mm low-density, smooth, flat, quality recycled rubber mat.
  • TCT-LineMAT 5mm grooved on one side, quality recycled rubber mat.
  • TCT-SquareMAT 8mm diamond patterned surface on one side, quality recycled rubber mat.
  • U-Channel Adaptor Black post with holes and welded square base. Made to anchor U-Channel posts.
  • U-Channel Post U-Channel post for use with sign bases. Available in heights of 4′, 5′, 6′ or custom.
  • VR-206-10E Black rubber speed hump with six reflective stripes.
  • VR-206-10M Black rubber speed hump with six reflective stripes.
  • VR-206-11E Black end piece with one mounting hole and two interlocking knobs.
  • VR-206-11M Black middle piece with eight reflective squares.
  • VR-206-6E Rubber speed bump ends that coordinate with VR-206-6M.
  • VR-206-6M Rubber speed bump middle sections – half black and half yellow.
  • VR-206-7E Rubber speed bump ends that coordinate with VR-206-7E.
  • VR-206-7M Rubber speed bump middle section – half yellow, half black.
  • VR-206-8E Black end piece with one mounting hole and two interlocking knobs.
  • VR-206-8M Black speed bump middle section with five yellow reflective safety stripes.
  • VR-206-9E Black rectangular end piece sold in sets of two.
  • VR-206-9M Black rectangular speed hump with eight reflective squares.
  • WCR-5 Standard ribbed two-sided pyramid wheel chock with eye-hook.
  • WCR-5Y Standard ribbed two-sided pyramid wheel chock with eye-hook.
  • WCR-7 Standard ribbed one-sided contoured wheel chock with eye-hook.
  • WCR-7Y Standard ribbed one-sided contoured wheel chock with eye-hook.
  • WCR-9 Standard smooth, two-sided pyramid wheel chock with eye-hook.
  • WCR-9Y Standard smooth, two-sided pyramid wheel chock with eye-hook.
  • WP-HD Heavy-duty wall protector with reflective markings.
  • WP-MD Medium-duty wall protector with reflective markings for visibility.
  • WS-2-Y Wheel stop with two holes molded through top for mounting.
  • WS-6-B Parking stop with four holes molded into the top for easy installation.
  • WS-6-Y Parking stop with four holes molded into the top for mounting.