-
BHR-1 Hose ramp with angled sides. Center cavity designed for 2″ PVC pipe.
-
CG-HD Heavy-duty corner guards with reflective chevrons to increase visibility.
-
CG-MD Medium-duty corner guard with reflective chevrons to increase visibility.
-
CP-HD-2 Two channel heavy-duty cable protector with attached lid. Supports weights up to 12 tons.
-
CP-HD-3 Three channel heavy-duty cable protector with attached lid. Supports weights up to 40 tons.
-
CP-HD-5 Five channel heavy-duty cable protector with attached lid. Supports weights up to 40 tons.
-
CP-SD-2 Two channel standard duty cable protector with attached lid. Supports weights up to 5 tons.
-
CP-SD-3 Three channel standard duty cable protector with attached lid. Supports weights up to 12 tons.
-
CP-SD-5 Five channel standard duty cable protector with attached lid. Supports weights up to 9 tons.
-
CPC-SD-2L Corner cable protector with attached lid for left turns. Supports weights up to 5 tons.
-
CPC-SD-2R Corner cable protector with attached lid for right turns. Supports weights up to 5 tons.
-
CPC-SD-3L Three channel corner cable protector for left turns. Supports weights up to 12 tons.
-
CPC-SD-3R Three channel corner cable protector for right turns. Supports weights up to 12 tons.
-
CPC-SD-5L Five channel corner cable protector for left turns. Supports weights up to 9 tons.
-
CPC-SD-5R Five channel corner cable protector for right turns. Supports weights up to 9 tons.
-
DB-27 Molded rubber base with four holes for mounting.
-
DH-CP-3 Drop over cable protector with 1.5″x0.5″ channel. Perfect for offices or homes.
-
DH-CP-4 Drop over cable protector with 4″x1.25″ channel. Perfect for offices, fairs or festivals. Drop over cable protector with 1.5″x0.5″ channel. Perfect for offices or homes.
-
DS-22 Drivewayspikes™ DrivewaySpikes are designed to stop unwanted vehicle traffic for residential, commercial and government use.
-
DS-47 Drivewayspikes™ DrivewaySpikes are designed to stop unwanted vehicle traffic for residential, commercial and government use.
-
DS-RS-Y Set of 5x 4″ replacement spikes.
-
DSSB-36 Splashblock with edge on three sides, one open edge.
-
FP-80 Orange flexible post with three reflective silver stripes.
-
FS-1 Lag and shield fastener system for attaching products to concrete.
-
FS-3 Galvanized spike and washer for use on asphalt, gravel or dirt surfaces.
-
GS-20 Parking stop with smooth finish and reflective stripe.
-
Lane Separator High UV, modular, visible and can be used without being fixed down.
-
LS-25 Pedestrian crossing sign attached to flexible post on a durable rubber base.
-
LS-E End section for lane separators, sold in sets of one male and one female piece. Supplied in yellow or black.
-
LS-E-Y End section for lane separators, sold in sets of one male and one female piece.
-
LS-M-RP Middle section, multiple can be connected to run custom lengths. Features reflective striping.
-
LS-RP Flexible orange post with reflective striping, for use with LS-M.
-
LY-25 Pedestrian crossing sign attached to flexible post on a durable rubber base.
-
MWC-14 Military aircraft wheel chock (14″) with 3/8″ rope and lanyard system.
-
MWC-20 Military aircraft wheel chock (20″) with 3/8″ rope and lanyard system.
-
PSB-118 Speed bump with eight folding sections, alternating black and yellow.
-
-
-
QFSS-20 Quick Fence Safety System with 20-lb. sign bases.
-
QFSS-30 Quick Fence Safety System with 30-lb. sign bases.
-
SB-20 Square sign base with molded center hole with PVC cap insert.
-
SB-30 Octagonal sign base with 1 ½” molded center hole.
-
-
SB-30W Octagonal base with molded 1 ½” hole, two wheels attached on one side.
-
SB-60 Octagonal sign base with 1 7/8” molded center hole.
-
SB-60W-HD New heavy duty 60 lb. recycled rubber sign base with 5” rubber wheels.
-
SB-90 Octagonal base with circular footprint extender base bolted on using hex-head lag screws.
-
-
-
SMB-112 Sign mounting brackets designed for use with 1 ½” PVC post.
-
SMB-2 Sign mounting brackets designed for use with 2″ PVC pipe.
-
Speed Spots A portable speed bump system designed to quickly reduce traffic speeds and protect lives
-
SS-25 Pedestrian crossing sign attached to flexible post on a durable rubber base.
-
SWC-7 7″ smooth wheel chock ideal for recreational vehicles or yard equipment.
-
SY-25 Pedestrian crossing sign attached to flexible post on a durable rubber base.
-
U-Channel Adaptor Black post with holes and welded square base. Made to anchor U-Channel posts.
-
U-Channel Post U-Channel post for use with sign bases. Available in heights of 4′, 5′, 6′ or custom.
-
VR-206-10E Black rubber speed hump with six reflective stripes.
-
VR-206-10M Black rubber speed hump with six reflective stripes.
-
VR-206-11E Black end piece with one mounting hole and two interlocking knobs.
-
VR-206-11M Black middle piece with eight reflective squares.
-
VR-206-6E Rubber speed bump ends that coordinate with VR-206-6M.
-
VR-206-6M Rubber speed bump middle sections – half black and half yellow.
-
VR-206-7E Rubber speed bump ends that coordinate with VR-206-7E.
-
VR-206-7M Rubber speed bump middle section – half yellow, half black.
-
VR-206-8E Black end piece with one mounting hole and two interlocking knobs.
-
VR-206-8M Black speed bump middle section with five yellow reflective safety stripes.
-
VR-206-9E Black rectangular end piece sold in sets of two.
-
VR-206-9M Black rectangular speed hump with eight reflective squares.
-
WCR-5 Standard ribbed two-sided pyramid wheel chock with eye-hook.
-
WCR-7 Standard ribbed one-sided contoured wheel chock with eye-hook.
-
WCR-9 Standard smooth, two-sided pyramid wheel chock with eye-hook.
-
WP-HD Heavy-duty wall protector with reflective markings.
-
WP-MD Medium-duty wall protector with reflective markings for visibility.
-
WS-2-Y Wheel stop with two holes molded through top for mounting.
-
WS-6-B Parking stop with four holes molded into the top for easy installation.
-
WS-6-Y Parking stop with four holes molded into the top for mounting.