-
DEPLOYABLE INFRASTRUCTURE
Click here to read about our engineering process Due to the security classification of this work within the Defence and Security Sector, details of products developed are available on request and following confirmation of the source of the Request for Information (RFI). -
TCT-CheckerMat Raised diamond checks on one side of the mat. Extremely durable and flexible.
-
TCT-LDMat 6mm low-density, smooth, flat, quality recycled rubber mat.
-
TCT-HDMat 8-10mm high-density, smooth, flat, quality recycled rubber mat.
-
TCT-SquareMAT 8mm diamond patterned surface on one side, quality recycled rubber mat.
-
TCT-LineMat 5mm grooved on one side, quality recycled rubber mat.
-
SECURITY BARRIERS AND BARRIERS
Click here to read about our engineering process Due to the security classification of this work within the Defence and Security Sector, details of products developed are available on request and following confirmation of the source of the Request for Information (RFI). -
FORCE PROTECTION ENGINEERING
Click here to read about our engineering process Due to the security classification of this work within the Defence and Security Sector, details of products developed are available on request and following confirmation of the source of the Request for Information (RFI). -
Lane Separator High UV, modular, visible and can be used without being fixed down.
-
LS-E-Y End section for lane separators, sold in sets of one male and one female piece.
-
LS-E End section for lane separators, sold in sets of one male and one female piece. Supplied in yellow or black.
-
LS-M-RP Middle section, multiple can be connected to run custom lengths. Features reflective striping.
-
LS-RP Flexible orange post with reflective striping, for use with LS-M.
-
Key Block Rectangle-shaped block, fits into base to lock containment system together.
-
Extension Blocks Extension block will fit into base to increase height of containment system.
-
Corner Piece Corner piece with rectangle cut-outs for key blocks to fit in & lock system.
-
Base Square-shaped base with rectangle cut-out for key block to fit & lock system.
-
BHR-1 Hose ramp with angled sides. Center cavity designed for 2″ PVC pipe.
-
DH-CP-4 Drop over cable protector with 4″x1.25″ channel. Perfect for offices, fairs or festivals. Drop over cable protector with 1.5″x0.5″ channel. Perfect for offices or homes.
-
DH-CP-3 Drop over cable protector with 1.5″x0.5″ channel. Perfect for offices or homes.
-
CPC-SD-5L Five channel corner cable protector for left turns. Supports weights up to 9 tons.
-
CPC-SD-5R Five channel corner cable protector for right turns. Supports weights up to 9 tons.
-
CPC-SD-3L Three channel corner cable protector for left turns. Supports weights up to 12 tons.
-
CPC-SD-3R Three channel corner cable protector for right turns. Supports weights up to 12 tons.
-
CPC-SD-2L Corner cable protector with attached lid for left turns. Supports weights up to 5 tons.
-
CPC-SD-2R Corner cable protector with attached lid for right turns. Supports weights up to 5 tons.
-
CP-SD-5 Five channel standard duty cable protector with attached lid. Supports weights up to 9 tons.
-
CP-SD-3 Three channel standard duty cable protector with attached lid. Supports weights up to 12 tons.
-
CP-SD-2 Two channel standard duty cable protector with attached lid. Supports weights up to 5 tons.
-
CP-HD-5 Five channel heavy-duty cable protector with attached lid. Supports weights up to 40 tons.
-
CP-HD-3 Three channel heavy-duty cable protector with attached lid. Supports weights up to 40 tons.
-
CP-HD-2 Two channel heavy-duty cable protector with attached lid. Supports weights up to 12 tons.